"Experts in fluid storage, pumping and piping systems."

HOME SEMINARS CONSULTING CONTACT US EMPLOYMENT

 

TECHNICAL LIBRARY

Various reference tables and charts are available for download.  Just right-click and use the "save as" option.  You will need the free Adobe Acrobat Reader available from the Adobe website to view these files.

 

 

Note:  The information presented is a compilation of technical data generated by KASA Redberg or sourced/adapted from other published works as a general guide.  Whilst every attempt has been made to ensure the validity of this data, KASA Redberg makes no warranties with respect to the completeness of the accuracy of the data presented and do not accept any liability for any losses or damages arising from the use of this data.

 

KDS001  Common Measurement Conversions Used in the Piping Industry
KDS002  Nozzle Flow Rates for Water at 20ºC
KDS003  Water Head Loss in Polyethylene Pipe to PE63-AS4130 at 20ºC
KDS004  Water Head Loss in PVC Pipe to AS1477 at 20ºC
KDS005  Water Head Loss in Type B Copper Tube to AS1432 at 15ºC
KDS006  Water Head Loss in Medium Steel Pipe to AS1074 at 20ºC
KDS007  Water Head Loss (Approximate) for Fittings and Valves
KDS008  Physical Properties of Water
KDS009  Kinematic Viscosity Conversion Table
KDS010  Hazen-Williams Constants
KDS011  Typical Valve and Fitting Friction Losses for Darcy Formula
KDS012  Maximum Working Pressures for Screwed Steel Pipe Fittings (Black and Galvanised) for use with “Medium” and “Heavy” Pipes to AS1074
KDS013  Pressure - Temperature Ratings for Steel Flanges to AS 2129
KDS014  Pressure - Temperature Ratings for Screwed and Socket Welded Carbon Steel & Stainless Steel Fittings to ASME B16.11
KDS015  Pressure - Temperature Ratings for Carbon Steel Flanges to ASME B16.5
KDS016  Pressure-Temperature Ratings for “Medium” and “Heavy” Pipes to AS 1074 Calculated in Accordance with AS 4041-1998 “Pressure Piping”

KDS017  Pressure-Temperature Ratings for Selected Seamless Grade B, Carbon Steel Pipes With Plain Ends Calculated in Accordance With ...

KDS018  Maximum Allowable Pressures for PVC Pressure Pipes to AS 1477 “Unplasticised PVC (uPVC) Pipes and Fittings for Pressure Applications”
KDS019  Maximum Allowable Pressures for Polyethylene  Pipes  Manufactured to AS/NZ 4130 “ PE Pipes, Pressure Applications”
KDS020  International Protection (IP) Ratings for Electrical Enclosures
KDS021  Standard Motor Sizes and Full Load Amps for Three Phase Induction Motors (415 volts/3 Phase/50 Hz)

KDS022  Moody Friction Factor Chart

KDS023  Pipe Material Design Specific Roughness Values for Common Pipe Materials

KDS024  Valve Constant (Cv) Correction Factors for Viscous Liquids

 

Pipe & Fitting Head Loss (aka Friction Loss) Calculator in Excel Spreadsheet Format

Air in Piping Systems (including air/vacuum valves)

Piping Seminar Extract - Advantages and Disadvantages of Common Pipe Materials Used in Municipal Applications

Piping Seminar Extract - Fatigue Cycling of Plastic Pipes

KASA Redberg Engineering Journal Article - The Top 10 Pumping Tips

 

KASA May 2008 Slurry Seminar - Bredel Hose Pumps System Design Calculations

KASA May 2008 Slurry Seminar - Simplified Settling Slurry System Design Calculations

 

AS4041 Pressure Piping Wall Thickness - Calculation Spreadsheet

Pipeline Design Calculations -  Present Value Analysis Method - Calculation Spreadsheet

Goal Seek for Colebrook Equation Using Microsoft Excel Spreadsheet

 

 

 

 

 
     FrontPage Template Co
TESTIMONIALS TECHNICAL LIBRARY ABOUT KASA REDBERG